EDI CON USA 2017

Sep 11, 2017 to Sep 13, 2017
Event location: 
Boston, MA

Venue:
Hynes Convention Center

Expo Hours:
Tue, Sep 12 | 12:00 p.m. - 7:00 p.m.
Wed, Sep 13 | 9:00 a.m. - 5:00 p.m.

Booth:
NI AWR Design Environment will be on display at Booth #317

Sponsorship:
NI is an EDI CON USA 2017 Gold Sponsor

NI AWR Software Demonstrations:

  • RF/Microwave Circuit Design Showcasing Solutions for Advanced MMIC/RFIC, RF PCB, Multi-technology Module, and Antenna Design
  • EM Simulation Supporting RF Circuit and Antenna Characterization and Design
  • RF Communications Systems Design for Radar, 5G/IoT, Phased-Array Antennas, RF Front Ends, and System Algorithm Development

NI AWR Software Presentations:

  • Practical RF PCB Design - Presented by Henry Lau, Lexiwave Technology, Inc.

    • 9:00 a.m. - 9:30 a.m. | Tue, Sep 12 | Rm 110
       
  • Practical Small Antenna Design for Wireless and IoT Products - Presented by Henry Lau, Lexiwave Technology, Inc
    • 1:00 p.m. - 1:30 p.m. | Tue, Sep 12 | Rm 109
       
  • Designing an IoT Dual-Band Compact Wi-Fi MIMO Array Using Antenna Synthesis - Presented by Derek Linden, AWR Group, NI
    • 1:40 p.m. - 2:10 p.m. | Tue, Sep 12 | Rm 109
       
  • EM/Circuit Co-simulation of a T/R Front-End Module and Actively-Scanned Antenna Array - Presented by John Dunn, AWR Group, NI
    • 9:00 a.m. - 9:30 a.m. | Wed, Sep 13 | Rm 108 
        
   
  • Simulation of BER, EVM, and ACPR Performance Under Proposed 5G Modulation Waveforms - Presented by Joel Kirshman, AWR Group, NI
    • 9:40 a.m. - 10:10 a.m. | Wed, Sep 13 | Rm 107
          
  • MIMO and Beam Steering Modeling in Support of 5G Applications - Presented by John Dunn, AWR Group, NI
         
    • 10:20 a.m. - 10:50 a.m. | Wed, Sep 13 | Rm 107


NI AWR Software Sponsored Workshops/Courses:

  • Advanced Load-Pull for Linear Power Amplifier Design Workshop - Presented by Andy Hughes, AWR Group, NI

    • 4:10 p.m. - 4:50 p.m. | Tue, Sep. 12 | Rm 109

More Information:
http://www.ediconusa.com