NI AWR Design Environment
Visit our Knowledge Base for Additional User Resources and Support
3D EM Simulation of Waveguide Filter
Demonstrates capabilities of Analyst, 3D finite element method EM simulator to analyze a classic 6 cavity iris waveguide amplifier example from Matthaei, Young and Jones. Hosted by Microwave Journal. Presented by: Andy Hughes, NI AWR Application Engineer at EDI CON 2016
|Video||November 15, 2016|
See NI AWR Software at IMS2016 - Booth #1529
This short video highlights our activities at IMS2016 exhibition in San Francisco.
|Video||March 30, 2016|
Measurement and Behavioral Modeling of High Power Transistors
This presentation will consider the optimum measurement set and measurement system hardware configuration for behavioral modeling. An example measurement set on high power will be shown along with analysis of measured performance to that achieved when simulating the extracted model in NI AWR software.
|Video||March 18, 2016|
IMS2015 MicroApps - Coffee Can Radar Optimized in NI AWR Design Environment
The MIT OpenCourseware Coffee Can Radar project provides free lectures and plans for building a working DIY radar system. This basic homodyne radar system design is capable of Range, Doppler, and Synthetic Aperture imaging and can be built with off the shelf connectorized components that operate in the 2.4GHz open ISM bands.
This talk takes the original Radar System and analyze it with a true system tool so that a designer can easily look at metrics relevant to radar engineers. Different components for the transmitting power amplifier, receiving low noise amplifier, and the homodyne systems mixer are used in Visual System Simulator system tool to determine the effect on distance ranging, probability of detection, and velocity uncertainly.
|Video||July 2, 2015|