NI AWR Software Addresses 5G, IoT and Radar Applications in Numerous Technical Talks at IMS2019

NI AWR software will be featured in a variety of activities at the International Microwave Symposium 2019 (IMS2019), taking place Jun 2-6 at the Boston Convention and Exhibition Center. Demonstrations in Booth #930 will highlight key features and applications in the latest release of the software. In addition, RF/microwave design solutions based on NI AWR software products will be featured in multiple microwave application seminars (MicroApps), workshops and short courses throughout the week. NI is also a gold sponsor of IMS2019 and will host of its fifteenth annual customer appreciation party.

MicroApps

  • Advanced Synthesis, EM Simulation of an IoT Antenna

    • Tue, Jun 4 | 11:15 a.m. – 11:35 a.m.
  • Designing a Narrowband Bandpass Filter for 5G Applications
    • Tue, Jun 4 | 3:15 p.m. – 3:35 p.m.
  • Point Ports – A New EM Port for Board Simulations
    • Thu, Jun 6 | 10:30 a.m. – 10:50 a.m.

Workshops/Short Courses

  • Build a 1-GHz Radar in a Day

    • Sun, Jun 2 | 8:00 a.m. – 5:15 p.m.
  • Accurate and Stable Microwave Vector Modulators
    • Mon, Jun 3 | 8:00 a.m. – 5:15 p.m.
  • Introduction to RF and Microwave Filters
    • Tue, Jun 4 | 1:00 p.m. – 3:00 p.m.
  • Electromagnetic (EM) Simulation of RFIC Silicon and Glass-Based Circuits
    • Tue, Jun 4 | 3:15 p.m. – 3:35 p.m.
  • Design, Fab, and Test Your Own Microwave Component
    • Thu, Jun 6 | 1:00 p.m. – 3:00 p.m.
  • Design Phased-Array Antennas for Multiple-In-Multiple-Out (MIMO) Applications
    • Thu, Jun 6 | 1:00 p.m. – 3:00 p.m.

For more information on NI AWR software solutions being showcased at IMS2019, visit awrcorp.com/news/events/event/ieee-ims-mtt-s-2019.